Change Settings; Language Settings; Picture And Video Settings; Audio Settings - Philips HTS3541 User Manual

5

Change settings

The home theatre settings are already confi gured
for optimal performance. Unless you have a reason
to change a setting, we recommend that you keep
the default setting.
Note
•
You cannot change a setting that is grayed out.
•
To return to the previous menu, press
BACK . To exit the menu, press

Language settings

1
Press ( Home ).
2
Select [Setup] , and then press OK .
3
Select [Preference] , and then press OK .
4
Press the Navigation buttons and OK to
select and change:
•
[Menu language] : Select a display
language for menu.
•
[Audio] : Select an audio language for
discs.
•
[Subtitle] : Select a subtitle language for
discs.
•
[Disc Menu] : Select a menu language for
discs.
Note
•
If your preferred disc language is not available,
select [Others] from the list, and enter the
4-digit language code found at the end of this
user manual .
•
If you select a language that is not available on a
disc, the home theatre uses the default language
of the disc.
EN.indd 17 EN.indd 17

Picture and video settings

1
2
3
4
( Home ).
•

Audio settings

1
2
3
4
Press ( Home ).
Select [Setup] , and then press OK .
Select [Video] , and then press OK .
Press the Navigation buttons and OK to
select and change:
•
[TV Display] : Select a picture format to
fi t the TV screen.
•
[HDMI Video] : Select the resolution of
video signal that is output from HDMI
OUT (ARC) on your home theatre.
To enjoy the selected resolution, make
sure that your TV supports the selected
resolution.
•
[HDMI Deep Color] : Recreate the natural
world on your TV screen by displaying
vivid images using billion colours. Your
home theatre must be connected to a
Deep Colour enabled TV through an
HDMI cable.
• [Picture Settings] : Select pre defi ned
colour settings for the video display.
• [Watch 3D video] : Set HDMI video to
support 3D or 2D video.
Note
If you change a setting, make sure that the TV
supports the new setting.
Press ( Home ).
Select [Setup] , and then press OK .
Select [Audio] , and then press OK .
Press the Navigation buttons and OK to
select and change:
•
[Night Mode] : For quiet listening,
decrease the volume of loud sounds on
your home theatre. Night mode is only
available for Dolby-encoded DVD and
Blu-ray discs.
• [HDMI Audio] : Set the HDMI audio
output from your TV, or disable HDMI
audio output from the TV.
EN
17
2/14/2012 2:30:02 PM 2/14/2012 2:30:02 PM