NC SW6 Maintenance Instructions Manual page 79

CHART E1—Dumper gearbox (continued)
Are chips wedged between splines of shaft or gear?
40
Are steel chips embedded in the bronze?
41
42 Are the synchroniser spring pins damaged?
43 Is the synchroniser bronze worn?
Fault Finding
Check Action
YES: Remove chips
NO: Ensure that clutch is disengaged
when dump pedal is pressed.
YES: Continue using, chips will either
embed blow bronze or be
rejected.
NO: Check 42
YES: Renew synchro.
NO: Check 43
YES: Renew synchro.
NO: Check block pins.
79