Setting The Video Signal Format - Toshiba 50HP82 Service Manual

Setting the video signal format

Use these operations to set the video signal format.
Example: Setting the video signal format to "3.58
NTSC"
Press the PROCEED button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the L and M buttons to select "INFORMATION",
then press the PROCEED button.
The "INFORMATION" screen appears.
2. Use the L and M buttons to select "COLOR SYSTEM",
then press the PROCEED button.
I N F O R M AT I O N
FREQUENCY
LANGUAGE
COLOR SYSTEM
SEL. PROCEED
The "COLOR SYSTEM" screen appears.
C O L O R S Y S T E M
COLOR SYSTEM
: AUTO1
ADJ.
3. To select "3.58 NTSC" ...
Use the and buttons to select "3.58 NTSC".
The mode switches as follows when the
buttons are pressed:
→ AUTO1 ↔ AUTO2 ↔ 3.58NTSC ↔ 4.43NTSC ←
→ SECAM ↔ PAL-M ↔ PAL-N ↔ PAL60 ↔ PAL ←
C O L O R S Y S T E M
COLOR SYSTEM
: 3.58NTSC
ADJ.
OK EXIT RETURN
EXIT RETURN
and
EXIT RETURN
4. Once the setting is completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
The color system is set to "3.58 NTSC".
Information
Video signal formats
Different countries use different formats for video
signals. Set to the format used in your current country.
AUTO1/2 ......... The video signals are automatically
detected and the format is set
accordingly.
AUTO1: 3.58NTSC, 4.43NTSC, PAL, SECAM,
PAL60
AUTO2: PAL-M, PAL-N, 3.58NTSC
PAL (B, G) ....... This is the standard format used
mainly in the United Kingdom and
Germany.
SECAM ............. This is the standard format used
mainly in France and Russia.
4.43 NTSC,
PAL60 .............. This format is used for videos in
countries using PAL and SECAM
video signals.
3.58 NTSC ...... This is the standard format used
mainly in Japan and the United States.
PAL-M ............. This is the standard format used
mainly in Brazil.
PAL-N .............. This is the standard format used
mainly in Argentina.
40