Table of Contents
Advertisement
Available languages
Available languages
If ingredients stick to the wall of the blender jar:
1)
Switch the appliance off and unplug it.
2)
Open the lid and use a spatula to remove the ingredients from the wall of the jar.
3)
Always unplug the appliance before reaching into the blender jar with your fingers or an
object (e.g. a spatula).
Note that it is not possible to use the food-processing functions when the blender is attached to
the motor unit!
wAyS OF ASSEMBLy AND USE OF KNEAD ACCESSORy
SAFETy
•
Do NOT place the miller blade unit on the main unit before installing into the miller cup.
•
Avoid touching the sharp blades.
•
Never touch the rotating tools while still in motion; always wait for them to stop.
IMPORTANT
•
Do not operate the appliance longer than 1 minute every time. Switch off as soon as you've
got the right consistency.
•
Don't process spices - they may damage the plastic.
•
The main unit won't work if the miller is fitted incorrectly.
•
Only use the miller for dry food.
1)
Place the food in the miller cup (maximum
in 1/2 of miller cup) Fit the sealing ring onto
the miller blade unit
2)
Place the miller blade unit onto the miller
cup. Fix it by turning the blade unit in coun-
ter-clockwise direction.
3)
Turn the assembled miller upside down
and place it on the motor unit. Fix the miller
by turning it in clockwise direction.
4)
Select the highest speed by turning the
control knob or press the turbo button.
ENG - 51
ENG
Advertisement
Table of Contents
