Mazda 2016 CX3 Owner's Manual page 572

Specifi cations
Personalization Features
Item
Active
driving
display
Refer to
Turn-by-Turn
Active
(TBT)
Driving
Display
on page
4-22 .
*1 Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda recommends
that these systems remain On.
*2 For vehicles with an audio system other than the on-screen function type, the warning sound cannot be changed.
The warning sound is only a beep.
*3 Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. The
volume of the warning beep during Rear Cross Traffi c Alert (RCTA) operation cannot be changed.
*4 If the auto-wiper control is set to Off, the wiper lever
*5 If the setting is changed to Off, the following operation is performed according to the headlight switch position:
At position: Headlights turn off immediately after the ignition is switched off.
At any position other than
*6 When set to Off, the lights-on reminder is operable.
*7 The setting of the lights-on reminder can be changed with the time setting of auto headlight off function set to
Off. Refer to Lights-On Reminder on page 7-39 .
*8 Available only in display from the center display.
9–16
Feature
Setting can be changed
so that the Turn-by-Turn
(TBT) of the Active
driving display is not
displayed.
: Headlights do not turn off after the ignition is switched off.
I n f o r ma t i o n P r o v i d e d b y :
Factory Available
Setting Settings
On On/Off
position is set to intermittent operation.
Settings change method
Refer to
Active
—
driving
display
on page
4-22 .