Mazda 2016 CX3 Owner's Manual page 216

When Driving
i-ACTIVSENSE
NOTE
When accelerating using the SET
switch while in headway control, the set
vehicle speed can be adjusted but
acceleration is not possible. If there is
no longer a vehicle ahead, acceleration
continues until reaching the set vehicle
speed. Check the set vehicle speed by
viewing the set vehicle speed display in
the active driving display.
When depressing the accelerator pedal,
the inter-vehicle distance display in the
active driving display changes to the
white-line display.
The minimum settable speed is 30 km/h
(19 mph). If the set vehicle speed
reaches 30 km/h (19 mph) using the
switch operation, constant speed travel
is maintained at about 30 km/h (19
mph) even if the SET switch is
pressed. The Mazda Radar Cruise
Control (MRCC) system is not canceled.
To Deactivate
The Mazda Radar Cruise Control (MRCC)
is canceled when the OFF switch is
pressed.
4–100
When the system is temporarily
canceled
In the following cases, the Mazda Radar
Cruise Control (MRCC) system is
temporarily canceled. The Mazda Radar
Cruise Control (MRCC) indicator light
(green) turns off simultaneously.
The CANCEL switch is pressed.
The brake pedal is depressed.
The parking brake is applied.
The selector lever is shifted to park (P),
neutral (N) or reverse (R).
In the following cases, the beep sounds
one time.
The vehicle speed decreases to less
than 25 km (16 mph).
The DSC has operated.
The TCS has operated for a certain
period of time.
The Smart City Brake Support (SCBS)
has operated.
The Smart Brake Support (SBS) has
operated.
When traveling on a down slope for a
long period of time.
There is a problem with the system.
I n f o r ma t i o n P r o v i d e d b y :