If Trouble Arises
Flat Tire
4. Turn the jack screw in the direction
shown in the fi gure and adjust the jack
head so that it is close to the jack-up
position.
5. Place the jack under the jack-up
position closest to the tire being
changed with the jack head squarely
under the jack-up point.
7–10
Jack head
Jacking position
6. Continue raising the jack head
gradually by rotating the screw with
your hand until the jack head is inserted
into the jack-up position.
Tire blocks
I n f o r ma t i o n P r o v i d e d b y :
Jacking position