HP LT3200 Service Manual page 68

LT 3700 Inverter Removal
Note: The 37-inch model has different sized inverters, as well as an additional flat ribbon cable from the inverter to the control
board.
1 Remove the six screws that secure the inverter cover to the unit, and then lift the cover up and out of the unit.
2 Disconnect the cables from the connectors on the inverter board.
Note: 4 total cables on Master. 3 total cables on Slave. To disconnect fragile flat ribbon cables, disconnect all other cables,
grasp the end of the flat ribbon cable, and then pull the board away from the cable.
Note: To disconnect the cables, grasp both sides of the cable near the connector, and then pull the cable straight out of the
connector.
3 Lift the inverter board up and off the unit.
62
HP High-Definition LCD TV Service Manual
Master inverter (above)
Slave inverter