Advertisement
ENGLISH
FEatUrE DEtaILS
B
CL3100
c
MAX/MIN
VOLTS : 1.3~750VAC
2.1~1000VDC
-1.8~-1000VDC
AMPS: 0.9~200 AAC
0
OHMS:
Continuity
F
0
10
20
D
E
~ 40MΩ
30
40
a
Where to Measure
a.
Measure Voltage, resistance, and continuity here
•
Use leads of proper safety rating only (CAT III / CAT IV).
•
Do not attempt to measure more than 1000V DC or 750V AC.
•
Do not attempt to measure current with leads.
B.
Measure current here
•
Measure up to 200A AC.
• Measure when display shows AUTO.
How to Select a Function or Feature
Use to turn instrument oN / oFF, or select MaX / MIN.
c.
• Press button for 2 seconds to power on or off.
• Press repeatedly to switch between maximum and minimum.
• Press button for 2 seconds to return to live reading from MAX/
MIN mode.
D.
Access resistance, continuity, and Backlight functions here.
• Press repeatedly to cycle through AUTO (V / A), resistance,
and continuity modes.
• Press for 2 seconds to enable/disable backlight and worklight.
Other Things to Note:
Magnet and Battery replacement are on back.
E.
• When
indicator is displayed on the LCD,
batteries must be replaced.
• Turn off device and disconnect leads.
• Remove the back screw and replace 2 x AAA batteries.
• Attach magnet to metal surfaces for hands-free use.
Device features auto Power-off (apo)
F.
• After 29 minutes non-use, the instrument will beep 3 times.
• After 1 more minute, the instrument will beep once and power
itself off to conserve battery power.
• Holding Va / Ω button while turning on disables Auto Power-Off.
FUNctIoN INStrUctIoNS
Voltage: < 1000 V Dc or 750 V ac
1.
CL3100
MAX/MIN
VOLTS : 1.3~750VAC
2.1~1000VDC
-1.8~-1000VDC
AMPS: 0.9~200 AAC
0
OHMS:
~ 40MΩ
Continuity
0
10
20
30
40
Advertisement
