Changing A Bulb - Ford Mondeo Owner's Handbook Manual

5
4
E85996
4. Carefully pull the corner of the grille
and bumper towards the front of the
vehicle.
5. Carefully lift the corner of the
headlamp and push it as far as
possible towards the back of the
vehicle.
6
E88982
6. Carefully pull the headlamp towards
the centre of the vehicle, behind the
grille and bumper, to disengage it from
the lower outer fixing point.
7. Remove the headlamp.
Lighting
When fitting the headlamp, take care
not to damage the locating points.
Note: When fitting the headlamp, make
sure that you fully engage the headlamp
in the lower outer fixing point.
Note: When fitting the headlamp, tighten
the front screw first and then the rear
screw.

CHANGING A BULB

Switch the lights and the ignition off.
Let the bulb cool down before
removing it.
Have Xenon bulbs changed by a
trained technician. There is a risk of
electric shock.
Do not touch the glass of the bulb.
7
Only fit bulbs of the correct
specification. See Bulb
specification chart (page 66).
Note: The following instructions describe
how to remove the bulbs. Fit
replacements in the reverse order unless
otherwise stated.
Headlamp
Note: Remove the covers to gain access
to the bulbs.
Direction indicator
1. Remove the headlamp. See
Removing a headlamp (page 58).
59
CAUTION
WARNINGS
CAUTIONS