Ford Mondeo Owner's Handbook Manual page 249

If there is an incoming call whilst there is
an ongoing call, a beep will be heard and
you will have the option to end the active
call and to accept the incoming call.
Accepting a second incoming call
Second incoming calls can be accepted
by pressing either the call accept button,
the PHONE button, or the MODE button
on the remote control.
Rejecting a second incoming call
Second incoming calls can be rejected by
pressing the call reject button. Units
without a telephone keypad can also
reject a second incoming call by pressing
the CD button, or the AM/FM button.
Muting the microphone
During a call, it is possible to mute the
microphone. Whilst muted, confirmation
will appear in the display.
Audio units with green call accept
button
Press the call accept button. Press the
button once again to turn this function off.
Audio units without green call
accept button
Press the seek up or down button. Press
the button once again to turn this function
off.
Changing the active phone
Note: Phones must be bonded to the
system before they can be made active.
Using the station storage button
Note: This process is only for audio units
without a telephone keypad.
1. Press the PHONE button on the
audio unit.
Telephone
2. Press the preset number required
(using the station preset buttons 1 -
6).
Using the audio unit menu
Note: After bonding a phone to the
system, this becomes the active phone.
1. Press the PHONE or call accept
button.
2. Press the MENU button on the audio
unit.
3. Select the ACTIVE PHONE option
on the audio unit.
4. Scroll through the different stored
phones by using the seek buttons to
display the bonded phones.
5. Press the MENU button to select the
phone which is to be the active phone.
Debonding a bonded phone
A bonded phone can be deleted from the
system at any time, unless a phone call is
in progress.
1. Press the PHONE or call accept
button.
2. Press the MENU button on the audio
unit.
3. Select the DEBOND option on the
audio unit.
4. Scroll through the different phones by
using the seek buttons and display the
phone to be debonded.
5. Press the MENU button to select the
phone which is to be debonded.
Debonding a bonded phone -
Sony radio
A bonded phone can be deleted from the
system at any time, unless a phone call is
in progress.
1. Press the PHONE button.
247