Remote Control Keypad/Lcd Screen; Charging Your Battery; Getting Ready To Fly - Quadrone Pro-Cam AW-QDR-PCAM Instruction Manual

REMOTE CONTROL KEYPAD AND LCD SCREEN
1. Sideways fine-tuning (Turn left/right fine-tuning in Mode 2)
2. Forward/backward fine-tuning
3. Turn left/right fine-tuning (Sideways fine-tuning in Mode 2)
4. Throttle power
5. Forward speed
6. Backwards speed
7. Right sideways speed
8. Left sideways speed
9. Left turning speed (The higher the level, the faster it will turn)
10. Right turning speed (The higher the level, the faster it will turn)
11. High/Low speed: Hold the "A" button to switch between high speed mode and low speed mode. "H" means high
speed and "L" means low speed.
12. Power indicator: Shows the remotes battery life
13. Mode indicator: Mode 1 is the default mode when powered on. To change to Mode 2, hold the "B" button, then
re-turn on the remote. The Mode on the LCD display will now be changed.
14. Signal power

GETTING READY TO FLY

Step 1: Switch the On/Off switch to ON.

CHARGING YOUR BATTERY

Step 1: Push the On/Off switch of the
quadcopter to the OFF position and then
open the battery cover.
Step 2: Open the battery cover and insert
the battery into the power port.
Step 4: Push the throttle lever to the
highest position, then push it to its lowest.
There will be a beep from the remote,
indicating the quadcopter is in pre-flight
mode.
Step 2: Pull the battery wire out of the
power port.
Step 3: Close the battery cover and turn on
the quadcopter.
Step 3: Insert the battery power port to the USB
charging cable. A light will turn on to indicate it
is charging.