Installing Landing Skids And Protective Frames; Controller Modes - Quadrone Pro-Cam AW-QDR-PCAM Instruction Manual

Charging time:90-100 minutes, Playing time 5.5-6.5 minutes
CAUTIONS WHEN CHARGING
1. Please keep this product in a dry, ventilated area away from any heat source or explosive product.
2. Please remove the battery from the quadcopter. Only charge under the supervision of an adult.
3. After flying, do not charge the battery until the battery has cooled down in order to avoid a swollen battery and
a fire hazard.
4. Please use the provided USB charging cable to avoid damaging the battery.
5. When not used for a long time, a battery can lose its charge. Avoid charging too often to maximize battery life.

INSTALLING LANDING SKIDS AND PROTECTIVE FRAMES

1. Install the landing skids to the bottom of the quadcopter, then lock screws (Figure 1).
2. Install the blade protecting frame to every corner, then lock screws (Figure 2).

CONTROLLER MODES

The remote features two built in modes, Mode 1 and
Mode 2. To change modes, flip the "B" button and
then restart the remote.
Operation Instructions
Hover up and down
Push the throttle up or down to make the
quadcopter fly up or down
Turn left and right
Push the throttle left or right to make the
quadcopter turn left or right.
Forward and backward
Push the direction lever up or down to make the
quadcopter fly forward or backward.
Sideward flying
Push the direction lever left or right to make the
quadcopter fly to the left side or the right side.