Sony Bravia KD-65X9000C Reference Manual page 25

5
Attach the Mounting Hook using the four screws supplied with the Wall-Mount Bracket.
Note
• Be sure to fasten the U-shaped Bar when attaching them to the TV. Use only a flat head screwdriver to install the
Wall-Mount Attachment. Use of another tool might result in over torqueing the Wall-Mount Attachment and
damaging the TV.
• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
• Be sure to store the unused parts in a safe place for future use. Retain this manual for future reference.
6
Remove the terminal covers, connect necessary cables to the TV and then detach the
Table-Top Stand from the TV.
Note
• When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the original
holes on the rear of the TV.
Refer to the instructions supplied with the Wall-Mount Bracket for your model to install the TV on the wall.
Mounting Hook
M6 × 16 (Removed on "1")
M6 × 32
GB
25 GB