Sony Bravia KD-65X9000C Reference Manual page 11

• It is necessary to attach both pieces of Support Belts
together.
• The wood screws may not be able to be used for
some TV rack types. In this case, ask Sony dealers or
licensed consultants for their recommendation of
suitable screw types.
• Attaching the Support Belts may be able to prevent
the TV from toppling over depending on the TV rack
strength. In case the TV rack may not be strong
enough, add additional countermeasure as
necessary.
The Support Belts cannot guarantee the TV from
falling over in an earthquake or unexpected incident.
KD-55X9000C
1
Remove the lower screws, and then one
of the Table-Top Stand.
2
Attach the stand plate (supplied with the
TV) to the detached Table-Top Stand.
Soft cloth
Stand plate
3
Fix the stand plate to the Table-Top
Stand with screws (M5×10) (supplied
with the TV).
4
Attach the Table-Top Stand with stand
plate to the middle position, and fix with
screws (M6×32) (supplied with the TV).
1.5 N∙m/1,5 N∙m
{15 kgf∙cm}
M6 × 32
5
Attach the Support Belts with screws N
(supplied with the TV).
Fall-Lock
Belt (N1)
6
Take the same procedure for the other
side of the Table-Top Stand.
1.5 N∙m/1,5 N∙m
{15 kgf∙cm}
M5 × 10
M5×10
screw
(N2)
11 GB
GB