13
Insert the lock pin (H2) (supplied with the TV).
14
Connect cables with TV by tilting it forward.
Note
• Two people are needed to carry out this installation.
• Be sure to fasten the U-shaped Bar when attaching them to the TV. Use only a flat head screwdriver to install the
U-shaped Bar. Use of another tool might result in over torqueing the U-shaped Bar and damaging the TV.
• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
Lock pin
(H2)
GB
21
GB