Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Sony Bravia KD-75X9100C
Summary of Contents for Sony Bravia KD-75X9100C
- Page 1 Television Reference Guide KD-75X9100C / 65X9000C / 55X9000C...
-
Page 2: Table Of Contents
Introduction Table of Contents Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference. Note • Before operating the TV, please read “Safety information” (page 2). • Instructions about “Installing the TV to the Wall” are included within this TV’s instructions manual. - Page 3 • Leave space around the TV set as shown below. disconnecting the AC power cord (mains lead). • It is strongly recommended that you use a Sony Wall-Mount • Do not connect too many appliances to the same AC power Bracket in order to provide adequate air circulation.
- Page 4 Ask your dealer or Sony service centre to have it checked by • If the TV is placed in the changing room of qualified service personnel.
-
Page 5: Precautions
3D video images or playing careful of unauthorised interception. We cannot be responsible stereoscopic 3D games. Sony recommends that all viewers take for any trouble as a result. regular breaks while watching 3D video images or playing stereoscopic 3D games. - Page 6 Disposal of the TV set ATTENTION: Disposal of Old Electrical & This product is qualified for the BEE Star rating in the ‘Home’ Electronic Equipment (Applicable in Mode. The Objectives of Star Labeling Program is designed to the European Union and other promote energy efficient products and practices.
-
Page 7: Parts And Controls
Parts and Controls Controls and Indicators Remote Control sensor* TV / Light sensor* / Illumination LED / 3D Sync Switch to a TV channel or input from other *1*3 Transmitter applications. The illumination LED lights up or blinks according to the status of the TV. -
Page 8: Inputs And Outputs
Inputs and Outputs LAN • When connecting a large USB device, connect to the USB 1 jack. HDMI 3 AUDIO IN AUDIO OUT / For HDMI 3 analogue audio connection. To listen to the TV's sound through the ... - Page 9 Internet. If you do not have a network connection, you will be able to download the software from the Sony support website using your PC. For details on how to upgrade, please visit the Sony support website. To stay informed about the...
-
Page 10: Using Remote Control
Using Remote Control Remote Control Parts Description IR (infrared) Remote Control Touchpad Remote Control / (Input select/Text hold) FOOTBALL* In TV mode: Display and select the input Turn Live Football Mode on or off (when the source. feature is available). In Text mode: Hold the current page. - Page 11 Internet. If you do not have a network connection, you will be able to download the (Jump) software from the Sony support website using your Jump back and forth between two channels PC. For details on how to upgrade, please visit the or inputs.
-
Page 12: Using The Touchpad Remote Control
Using the Touchpad Remote Control Attaching the Table-Top Stand Touchpad Remote Control can only be used (Alternative) after pairing with the TV. To pair, follow the pairing screen instruction. You can change the Table-Top Stand from the Pairing screen can be displayed by pressing the edge to the middle position by referring to the ... - Page 13 Fix the stand plate to the Table-Top Stand with screws (M5×10) (supplied with the TV). 1.5 N∙m/1,5 N∙m {15 kgf∙cm} M5 × 10 Attach the Table-Top Stand with stand KD-55X9000C plate to the middle position, and fix with screws (M6×32) (supplied with the TV). Remove the lower screws, and then one of the Table-Top Stand.
-
Page 14: Connecting The Tv
Note • Two or more people are needed to carry out this Connecting the TV installation. • Ensure that there are no objects in front of the TV. Note • To select an input device connected to the TV, press . - Page 15 To connect with component cables To connect with Analogue Extension Cable Availability depends on countries/regions/TV models. 3.5 mm 1: L 3 2 1 2: Video 3: Ground 4: R To VIDEO OUT To AUDIO To COMPONENT OUT (P...
- Page 16 To connect MHL device The TV simultaneously charges the MHL- compatible connected device while playing photo/music/video files. You can use the TV remote control to control the connected MHL- compatible device. Note • If [MHL charging during standby] is set to [On], you can continue charging the MHL-compatible device even when the TV is in standby mode.
-
Page 17: Installing The Tv To The Wall
To Sony Dealers and Contractors Sufficient expertise is required for installing this product. Be sure to read this instruction manual thoroughly to do the installation work safely. Sony is not liable for any damages or injury caused by mishandling or improper installation. - Page 18 Prepare necessary items. Wall-Mount Bracket accessories Cushion L M6 × 20 Paper Template Wall-Mount Bracket U-shaped Bar Lock plate (H1) Lock pin (H2) KD-75X9100C Wall-Mount Bracket (H3) Screws for Wall-Mount Bracket (8 mm in diameter, not supplied) (4) Remove the screws from the rear of the TV before attaching the U-shaped Bar. KD-75X9100C KD-65/55X9000C M6 ×...
- Page 19 Attach the U-shaped Bar J (supplied with the TV) to the rear of the TV. KD-75X9100C U-shaped Bar J 1.5 N∙m/1,5 N∙m {15 kgf∙cm} M6 × 20 L KD-65/55X9000C U-shaped Bar J 1.5 N∙m/1,5 N∙m {15 kgf∙cm} M6 × 16 (previously removed) Attach the cushions K to the rear of the TV.
- Page 20 Make sure that the wall has enough space for the TV and is capable of supporting a weight of at least four times that of the TV. Refer to the following table on installing the TV to the wall. See page 31-34 (Specifications) for the TV’s weight.
- Page 21 Tape the Paper Template A to the wall and drill holes according to the numbering on the Paper Template A using an electric drill. Wall Remove the Paper Template A off from the wall. Attach the Wall-Mount Bracket (H3) (supplied with the TV) to the wall correctly using the screws (8 mm in diameter, not supplied).
- Page 22 Hang the U-shaped Bar to the Wall-Mount Bracket on the wall. Attach the lock plate (H1) (supplied with the TV). Lock plate (H1) Insert the lock pin (H2) (supplied with the TV). Lock pin (H2)
- Page 23 Connect cables with TV by tilting it forward. Note • Two people are needed to carry out this installation. • Be sure to fasten the U-shaped Bar when attaching them to the TV. • If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}. •...
-
Page 24: Using An Optional Wall-Mount Bracket
Sufficient expertise is required for installing this product, especially to determine the strength of the wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to the wall to Sony dealers or licensed contractors and pay adequate attention to safety during the installation. Sony is not liable for any damage or injury caused by mishandling or improper installation. - Page 25 Make sure that the wall has enough space for the TV and is capable of supporting a weight of at least four times that of the TV. Refer to the following table on installing the TV to the wall. See page 31-34 (Specifications) for the TV’s weight.
- Page 26 Remove the screws from the rear of the TV before attaching the U-shaped Bar. KD-75X9100C KD-65/55X9000C M6 × 12 M6 × 16 Attach the U-shaped Bar J (supplied with the TV) to the rear of the TV. KD-75X9100C U-shaped Bar J 1.5 N∙m/1,5 N∙m {15 kgf∙cm} M6 ×...
- Page 27 Attach the cushions K to the rear of the TV. Cushions K Refer the below diagram/table about the screw and hook locations and determine the screw positions. Model Name Screw location Hook location 75X9100C d, g 65X9000C d, g 55X9000C Screw location Hook location When installing the...
- Page 28 Attach the Mounting Hook using the four screws supplied with the Wall-Mount Bracket. Note • Be sure to fasten the Wall-Mount Bracket when attaching them to the TV. • If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}. •...
- Page 29 Remove the terminal covers, connect necessary cables to the TV and then detach the Table-Top Stand from the TV. Note • When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the original holes on the rear of the TV. Refer to the instructions supplied with the Wall-Mount Bracket for your model to install the TV on the wall.
-
Page 30: Troubleshooting
TV. If the problem persists, contact your dealer or Sony service centre with the number of times the illumination LED flashes red (interval time is three seconds). Disconnect the mains lead, and inform your dealer or Sony service centre. -
Page 31: Specifications
Cannot find the required network name in network setup. Specifications • Select [[Manual entry]] and press to enter network name. System Panel system LCD (Liquid Crystal Display) Panel, LED Backlight TV system Analogue: B/G, I, D/K, M: Depend on your country/area selection. - Page 32 Over-Under: 1080p (30, 50, 60 Hz), 1080/24p, Active 3D Glasses: TDG-BT500A (KD-75X9100C) 1080i (50, 60 Hz), 720p (50, 60 Hz) Audio: 5.1 channel linear PCM: 32, 44.1, 48, 88.2, 96, 176.4 and 192 kHz, 16, 20 and 24 bits, Dolby Digital and DTS ARC (Audio Return Channel) (HDMI IN 4 only) MHL (HDMI IN 2)
-
Page 33: Trademark Information
• This TV set incorporates MHL 3. owned by the Bluetooth SIG, Inc. and any Notes on Digital TV function use of such marks by Sony Corporation is under license. Other trademarks and trade • Any functions related to Digital TV... - Page 36 Customer Support and Contact: ©2015 Sony Corporation Printed in Malaysia 4-562-096-12(1)