Automatic Charging - Samsung SR10J50 Series User Manual

Steps to take if recharging is not being executed.
Check the installation status of the charger when:
• the charger is located in a place where the robot vacuum cleaner cannot easily access.
• distance between the charger and robot vacuum cleaner is over 5 m apart.
– It may take a long time for the robot vacuum cleaner to return to the charger for
recharging.
Manually charge the robot vacuum cleaner when:
• the charger is located in a corner.
• battery is fully exhausted.
• the robot vacuum cleaner is stuck by obstacles (furniture etc.).
• the robot vacuum cleaner can't climb threshold near charge. (Height of the threshold
that the robot vacuum cleaner can climb: about 1.5 cm and below)
• when the battery indicator blinks and "Lo" is displayed.
• when the robot vacuum cleaner is set on Spot clean or Manual clean mode.

Automatic charging

When the battery indicator blinks during
cleaning, the robot vacuum cleaner will
return to the charger to charge itself
automatically.
Recharge
You can command the robot vacuum
cleaner to recharge at the charger while it
is in cleaning process.
Low battery (Lo)
Manually charge the robot vacuum cleaner
by placing it on the charger.
15