ATTACHMENT CLUTCH LEVER
(RIGHT SIDE)
See Figure 9.
Controls auger / impeller movement.
Figure 9
TRACTION DRIVE CLUTCH
LEVER (LEFT SIDE)
See Figure 10.
Allows unit to travel forward and in reverse.
Figure 10
DUAL HANDLE INTERLOCK
Allows auger / impeller to rotate without
holding attachment clutch lever continuously.
Auger continues to turn until both clutch
levers are released.
DISCHARGE CHUTE ROTATION
LEVER
See Figure 11.
Rotates discharge chute to control snow
discharge. Pull lever back to unlock chute,
move lever left or right to desired position,
and then push lever forward to lock chute in
place.
DISCHARGE CHUTE DEFLECTOR
LEVER
See Figure 12.
Moves discharge deflector up or down to
control height of snow discharge.
HEATED HAND GRIP SWITCH
Controls heat supply to hand grips.
SCRAPER BLADE
Contacts the surface being cleared and
protects the housing from damage during
normal use.
DRIFT CUTTER
Breaks up snow drifts that are taller than the
auger housing and directs snow into auger.
SKID SHOE
Controls the distance between the scraper
blade and the surface.
EN - 10
200°
Figure 11
Figure 12