Belt Clip & Optional Headset - AT&T E5917 User Manual

5.8 ghz cordless telephone/answering system with caller id/call waiting

Hide thumbs Also See for E5917:

Table of Contents

Getting started

Belt clip & optional headset

Install belt clip as shown below if desired.

Snap belt clip into notches on

the sides of handset.

For hands-free telephone conversations, you can use any industry standard

2.5 mm headset (purchased separately). For best results, use an AT&T 2.5 mm

headset.

To release belt clip from handset,

press on both flaps of the clip (as

shown). Pull and unlock one flap from

the notch first before detaching the

whole belt clip from handset.

Plug 2.5 mm headset

into the jack on the side

of handset (beneath

small rubber cap).

Table of Contents

E5938 E5939