Chapter
02
Basic operation
Ejecting an SD memory card
F77DAB
F70DAB
1
Press the h button.
The following screen appears.
2
Touch the following key.
3
Press the middle of the SD memory
card gently until it clicks.
The SD memory card is ejected.
4
Pull the SD memory card out straight.
5
Press the h button.
The LCD panel closes.
Connecting and disconnecting
an iPod
Connecting your iPod
= For details of the connections, refer to the
Installation Manual.
Disconnecting your iPod
% Pull out the cables after confirming
that no data is being accessed.
Plugging and unplugging a USB
storage device
p This product may not achieve optimum per-
formance with some USB storage devices.
p Connection via a USB hub is not possible.
p A USB cable is required for connection.
16
Engb
Opens the LCD panel.
Plugging in a USB storage device
% Plug a USB storage device into the USB
cable.
1
1 USB cable
2 USB storage device
Unplugging a USB storage device
% Pull out the USB storage device after
checking that no data is being accessed.
Startup and termination
1
Start the engine to boot up the system.
After a short pause, the splash screen comes
on for a few seconds.
2
Turn off the vehicle engine to termi-
nate the system.
This product is also turned off.
On first-time startup
When you use this product for the first time,
select the language that you want to use.
1
Start the engine to boot up the system.
After a short pause, the splash screen comes
on for a few seconds.
The "Select Program Language" screen ap-
pears.
2
Touch the language that you want to
use on screen.
2