Pairing From Your Bluetooth Devices - Pioneer AVIC-F77DAB Operation Manual

Registering and connecting a Bluetooth device
5 Touch the following key.
Starts searching.
The system searches for Bluetooth devices
waiting for a connection and displays them in
the list if a device is found.
p Up to 20 devices will be listed in the order
that the devices are found.
6 Wait until your Bluetooth device ap-
pears in the list.
p If you cannot find the Bluetooth device that
you want to connect, check that the device
is waiting for a Bluetooth wireless technol-
ogy connection.
7 Touch the name of the Bluetooth device
you want to register.
While connecting, "Pairing... Please wait." is
displayed. If the connection is established,
"Paired." is displayed.
p If your device supports SSP (Secure Simple
Pairing), a six-digit number appears on the
display of this product. Touch [Yes] to pair-
ing the device.
p If the connection fails, "Error" is displayed.
In such cases, try again from the begin-
ning.
p The PIN code is set to "0000" as the default,
but can be changed.
= For details, refer to Entering the PIN code
for Bluetooth wireless connection on
page 73.
p Once the connection is established, the de-
vice name is displayed. Touch the device
name to disconnect.
After the device is successfully registered, a
Bluetooth connection is established from the
system.
The profile icons displayed on the registered
device list screen light up as follows.
Lights up when your mobile device
is successfully connected with the
HFP (Hands-Free Profile).
Lights up when your audio device
is successfully connected with the
A2DP (Advanced Audio Distribu-
tion Profile)/AVRCP (Audio/Video
Remote Control Profile).
Lights up when the Bluetooth con-
nection is established with the
SPP (Serial Port Profile).
p After pairing, the phone book registered in
the device may be automatically trans-
mitted to this product.
# If you touch the following key, you can switch
the display between the device names and
Bluetooth device addresses.
Switches between the device
names and Bluetooth device ad-
dresses.
Pairing from your Bluetooth
devices
You can register a Bluetooth device by setting
this product to standby mode and requesting
a connection from the Bluetooth device.
p Before registration, make sure that "Visibi-
lity" in the "Bluetooth" menu is set to
"On".
Chapter
11
71
Engb