Console Features - Weslo Magnetic Jog WITL11013.0 User Manual

CONSOLE FEATURES

CONSOLE FEATURES
Follow your progress with the display.
The console has six displays that show the following
workout information:
Speed—This display shows your pedaling speed,
in kilometer per hours (Km/h).
Time—This display shows the elapsed time.
Distance—This display shows the distance you
have run or walk in total kilometer during your
workout.
Calories—This display shows the approximate
number of calories you have burned.
Pulse—This display shows your heart rate when
you use the handgrip pulse sensor.
ODOMETER—This display shows the total distance
you have run or walk in total kilometer during the
first use of the product.
Note this data will be reset only when you change
the batteries.
HOW TO USE THE CONSOLE
Make sure that the console has batteries (see page
MAINTENANCE AND TROUBLESHOOTING). If
there is a sheet of clear plastic on the face of the
console, remove it.
1. Turn on the console
To turn on the console, press any button on the
console or simply begin pedaling.
2. Press the buttons :
MODE:
Press this button to choose the value you want to be
displayed.
By holding this button for more than 4 seconds, all
values will be reset.
SET:
Press this button to set the selected values when
not in Scan mode.
Set a value which will countdown on any functions
of time, distance and calorie. when the value will
goes to zero than the computer will alarm for 15
seconds.
RESET:
Press this button to reset the values of time,
distance and calories.
3. Start exercise and follow your progress with
the display :
While you exercise, the console will display the
selected mode.
4. When you are finished exercising, the console
will automatically turn off.
The console has an "auto-off" feature. If the belt
do not move and the console buttons are not
pressed for a few minutes, the power will turn off
automatically to save the batteries.
8