Table of Contents
Advertisement
1.3 WIZ6000 Device server Interface
1.3.1 Hardware Installation
STEP1:
Connect the WIZ6000 to the HUB or PC by using a network cable.
STEP2:
Connect the WIZ6000 to the serial device by using the RS-232C serial cable.
STEP3: Insert the power supply connector to
DC power adaptor.
STEP4:
Configure the network parameters of WIZ6000 and your PC.
- The default IP address of WIZ6000 is "192.168.1.254".
Your PC's IP address should start with these three sets of numbers "192.168.1.XXX".
- WIZ6000 and PC can be connected through wireless network.
Connect to WIZ6000 from PC by using default SSID "WLANAP"
(WIZnet Co., Ltd.)
WIZ6000 User's Manual
Figure 1. WIZ6000 Device Server Interface
the WIZ6000 by using the 5V / 2A
5
Advertisement
Table of Contents
