Interior Lighting - U-Line 3060FZR User Manual

USER GUIDE
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
®
U-SELECT CONTROL
Digital Display
The 3000 Series units are controlled by a feature rich,
advanced OLED display control unit. The control panel
allows adjustment to temperature set point, access to
Energy Saver Mode, internal temperature readings, and
many other features.
ADJUSTING TEMPERATURE SETTINGS
Up
Can be displayed in Celsius
Down
Each zone has a series of Mode Settings with a default
value for each setting. Each Mode Setting can be further
customized by fine tuning the temperature set point. See
the chart below for a description of each mode and mode
temperature ranges. Mode selection will vary by model.
Mode Settings
Setting Default °F (°C)
Polar 0 (-18)

Interior Lighting

Your U-Line 3000 Series unit uses a state of the art LED
lighting system. The 3036 model dual zone's lighting can
be independently controlled or set as a group.
Up
Down
1. To begin, press to enter the lighting menu.
2. Press or to cycle through each available
brightness setting (Low, Medium or High).
Zone Toggle
Select
Polar
O°F
Power
U-Select Lighting
Range °F (°C)
(-5) - 5 ([-21] - [- 15])
Select
Power
U-Select Lighting
3. Press to cycle through each available timer setting.
Selections include "On With Door", "On 3 Hours", "On 6
Hours", or "On 24 Hours".
4. To exit, press or simply wait for the menu to time
out.
Error Notification
The 3000 model series continuously monitors a series of
inputs and parameters to ensure proper and efficient
operation of your unit. Should the system detect a fault,
an error notification will be displayed on the user
interface. See below for a list of errors.
NOTE: Singe zone models will not use (L) left or (R) right
zone indicators in error notification.
ID Description
No Comm Unit lost
communication to the
display.
(L) (R) Zone Left or right zone
T Open thermistor circuit open.
Amb Thrm Ambient thermistor
Open circuit open.
(L) (R) Zone Left or right zone
T Short thermistor circuit
shorted.
Amb Thrm Ambient thermistor
Short circuit shorted.
(L) (R) Temp Left or right zone
Hi 6H+ temperature +10° over
set point for over 6
hours.
(L) (R) Temp Left or right zone
Hi 12H+ temperature +10° over
set point for over 12
hours.
(L) (R) Temp Left or right zone
Lo 6H+ temperature -10°
under set point for
over 6 hours.
(L) (R) Temp Left or right zone
Lo 12H+ temperature -10°
under set point for
over 12 hours.
(L) (R) Door Left or right door
Open 5M switch open for more
then 5 minutes.
u-line.com
Solution
Disconnect and reconnect
power to unit. Contact
Customer Care if
persistent.
Contact Customer Care.
Contact Customer Care.
Contact Customer Care.
Contact Customer Care.
Verify door is closed and
sealing. Contact Customer
Care if persistent.
Verify door is closed and
sealing. Contact Customer
Care if persistent.
Verify door is closed and
sealing. Contact Customer
Care if persistent.
Verify door is closed and
sealing. Contact Customer
Care if persistent.
Verify door is closed and
sealing. Contact Customer
Care if persistent.
Control Operation 2