Optional Accessories; Forced Air Kit - Monessen Hearth DBX24C Installation And Operating Instructions Manual

DFX & DBX Series Vent Free Fireplaces

FORCED AIR kIT

If you are installing the forced air kit (Models BLO4-T, BLO4-TB or BLOT), see the installation
instructions provided with the kit for electrical wiring requirements or the blower installation sec-
tion.
Model DFX4C uses blower model BLO4T.
Model DFX3C uses blower model BLOT.
Model DBX4C uses blower model BLO4TB.
The firebox must be connected to main power supply at time of firebox installation. The blower must
be installed prior to the installation of the unvented heater. The electrical connections must be made
before the firebox is framed and enclosed in the finished walls.
BRASS LOUVERS
Optional brass louvers may be installed in place of the factory installed black louvers. See installa-
tion instructions provided with the brass louvers.
FIREBRICkS
Optional firebrick kits can be installed. See installation instructions provided with kit or Page 33.
Electrical connections should only be performed by a qualified, licensed
electrician, main power must be off when connecting to main electrical
power supply or performing service.
3

OPTIONAL ACCESSORIES

33D4047