Rock Wool Placement - Monessen Hearth DBX24C Installation And Operating Instructions Manual

LOG PLACEMENT
DFX32C LOG PLACEMENT
Figure 20
1. Install front right log (#1) on two pins on right side of
burner.
. Install left front log (#) on two pins on left side of
burner.
3. Install back log (#3) on back of burner.
4. Install right middle log (#4) on two pins on burner. Rest
right end of right middle log on the right front log.
5. Install left middle log (#5) on two pins on burner. Rest
left end of left middle log on left front log.
DBX24C LOG PLACEMENT
Install one-piece log on two burner pins. Figure 21
Burner
Pin
Figure 21 -
24BDXC Log Placement
33D4047
LG701
24BDXC logs
Figure 20 -
DFX32C Log Placement
One-piece Log
LG701
Burner Pin
DFX & DBX Series Vent Free Fireplaces
Rear Log
#3
Left Middle
Log #5
Left Front
Log #
Pins
Pins
PLACE ROCk WOOL
DFX24C and DFX32C MODELS
LG700
After installing logs, pull apart dime-size pieces of rock
32VFSC logs
wool. Sprinkle rock wool evenly over burner ports. Wash
hands after installing rock wool.
Itching may occur.
Dime Sized
Rockwool
Pieces
Figure 22 -
Place Rockwool DFX24C/DFX32C
•
Use only rock wool provided with log
set.
•
Do not add additional rock wool.
•
Place rock wool on burner ports only.
•
keep air gap between rear log and
burner clean.
LG700
Pins
LG702
VFS DBX rockwool
Right
Middle
Log #4
Right Front
Log #1
Pins
19