Table of Contents
Advertisement
4. DIRECTION FOR DISASSEMBLY AND ASSEMBLY
Replacing Wash Timer And Spin Timer
1. Remove 3 screws on the panel
3. Remove control lever and timer.
Replacing Motor For Spin And Wash
1. Remove 2 screws on the cover B.
8
DISASSEMBLY
2. Remove knob and 2 screws on the bracket panel.
2. Sepeate link brake from the brak wire assembly.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DWM-800C and is the answer not in the manual?
Questions and answers
How to change the wash capacitor in my daewoo dual washing machine
To change the wash capacitor in a Daewoo DWM-800C washing machine, follow these steps:
1. Unplug the Washing Machine – Ensure the machine is disconnected from the power supply to prevent electrical hazards.
2. Access the Capacitor – Locate the wash capacitor (part number 4509C11020, 20.8uF*2, 200V) inside the machine. It is typically near the wash motor.
3. Discharge the Capacitor – Use an insulated screwdriver to short the capacitor terminals carefully to discharge any stored electricity.
4. Remove the Old Capacitor – Disconnect the wires from the capacitor terminals and unscrew or unclip it from its mounting.
5. Install the New Capacitor – Attach the new capacitor in the same position and reconnect the wires correctly.
6. Secure and Test – Ensure all connections are tight, reassemble the machine, plug it in, and test the wash function to confirm proper operation.
If unsure, consult a qualified technician.
This answer is automatically generated
Help please My wash motor icode is T-W1S35ED050 but I don't know which is the capacitor rate for this motor. I hope someone could hep me