Table of Contents
Advertisement
1. SPECIFICATIONS
NO.
ITEM
1 POWER
VOLTAGE
SOURCE
FREQUENCY
2 POWER
800C
CONSUMPTION 900C
3 DIMENSION
800C
900C
4 MACHINE
800C
WEIGHT
900C
5 WASHING COURSE
6 WATER LEVEL
7 REVOLUTION WASH
PER MINUTE SPIN
8 TIMER
WASH
SPIN
9 WASHER TYPE
10 SPIN TYPE
11 MAXIMUM MASS WASH
OF TEXTILE
SPIN
12 WATER SUPPLY
13 SPIN RINSE
14 OUTLET OF DRAIN HOSE
15 LINT FILTER
NOTE : Explanation table for suffix of names.
POWER SOURCE
AC 100V 50/60Hz
AC 110V 60Hz
AC120V 60Hz
AC 220V 50Hz
AC 220V 60Hz
AC 240V 50Hz
AC 110/220V 50Hz
AC 120/240V 60Hz
2
SPECIFICATIONS
AC 110V
AC 120V
AC 220V AC 127/220V
60Hz
480W NON PUMP/515W PUMP
630W
Net with legs: 830X475X950, Packed without legs : 870X533X947 (WXDXH,mm)
Net with legs: 830X475X970, Packed without legs : 870X533X947 (WXDXH,mm)
Non pump (Net:24kg Packed up:27kg), Pump (Net:25kg Packed up:28kg)
Non pump (Net:25kg Packed up:28kg), Pump (Net:26kg Packed up:29kg)
900C-EXTRA HIGH:70l, HIGH:60l, MEDIUM:52l, LOW:44l
800C-170 rpm / 900C-190 rpm
1700 rpm
MAX. 15 min., Manual operation
MAX. 5 min., Manual operation
CENTRIFUGALLY SEPARATED TYPE
SUFFIX
NON PUMP
J
T
A
N
L
M
D
S
SPECIFICATIONS
AC 110/220V
STRONG, NORMAL
800C-170 rpm / 900C-190 rpm
PULSATOR TYPE
800C-6.0 kg / 900C-7.0 kg
5.5 kg
MANUAL
O
REAR
O
EXPLANATION
PUMP
-
TP
AP
Model Name
NP
DWM-XXXX N or NP
LP
MP
DP
SP
AC 220V
AC 240V
50Hz
560W
1400 rpm
Pump
Power Source
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DWM-800C and is the answer not in the manual?
Questions and answers
How to change the wash capacitor in my daewoo dual washing machine
To change the wash capacitor in a Daewoo DWM-800C washing machine, follow these steps:
1. Unplug the Washing Machine – Ensure the machine is disconnected from the power supply to prevent electrical hazards.
2. Access the Capacitor – Locate the wash capacitor (part number 4509C11020, 20.8uF*2, 200V) inside the machine. It is typically near the wash motor.
3. Discharge the Capacitor – Use an insulated screwdriver to short the capacitor terminals carefully to discharge any stored electricity.
4. Remove the Old Capacitor – Disconnect the wires from the capacitor terminals and unscrew or unclip it from its mounting.
5. Install the New Capacitor – Attach the new capacitor in the same position and reconnect the wires correctly.
6. Secure and Test – Ensure all connections are tight, reassemble the machine, plug it in, and test the wash function to confirm proper operation.
If unsure, consult a qualified technician.
This answer is automatically generated
Help please My wash motor icode is T-W1S35ED050 but I don't know which is the capacitor rate for this motor. I hope someone could hep me