Daewoo DWM-800C Service Manual page 15

Hide thumbs Also See for DWM-800C:
Table of Contents

Advertisement

PROBLEM
Is the Wash Timer OFF when the Drain
Selector is in the DRAIN position
Draining
does not
function dur-
ing drain
Is the pump Motor wiring properly
selecting
connected?
Are the wiring of the Spin Timer
and the Pump Motor good?
Drain does
not function
during Spin
Is the Spin Timer's contact good?
drying
Concerning Drainage (Non Pump)
PROBLEM
Are there impurities in the Drain
Strainer?
Drainage is
Are there impurities in the Valve
not satisfac-
Housing or Inlet Joint?
tory.
Is the Drain Selector on the opera-
tion Panel at the DRAIN position?
Water keeps
draining dur-
ing wash
14
TROUBLE SHOOTING
CHECK POINT
YES
NO
NO
YES
NO
NO
YES
CHECK POINT
YES
NO
YES
NO
YES
NO
CAUSE
Pump Motor does not work
because Power is open.
Defective wiring
Defective Pump motor
Defective wiring
Defective Spin Timer
Defective Pump motor
CAUSE
Impurities are obstructing
drainage.
Impurities are obstructing
drainage.
Impurities are blocking the
Drain Hose
Mismanupilation
There are impurities
between the impurities
Housing and Valve Bellows.
SOLUTION
Adjust Wash Timer for ade-
quate draining time.
Reconnect wiring
Replace Pump Motor
Reconnect wiring
Replace Spin Timer
Replace Pump Motor
SOLUTION
Disassemble Agitator and take
out impurities in Drain Strainer
Remove impurities or replace
Valve Housing or Inlet Joint
Remove impurities
Turn Drain Selector to
WASH/RINSE position
Remove impurities Or replace
Valve Housing.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dwm-900cDwm-800cpDwm-900cp

Table of Contents