Infrared Decoding Usage - Osoto PH-200W User Manual

will hear of a short voice "Bee" (if some projectors need 2 seconds
to turn on, users need to press remote controller more than 2
seconds to decode), and indicator will be on;
4. Decode projector's off: Put projector's remote controller
oppoiste to visual presenter's infrared receiver window, press
button, and will hear of a short voice "Bee", indicator will be off.
Put projector's remote controller opposite to infrared receiver
window, press "Off", and will hear of a short "Bee", indicator will be
on;
5.Decode projector's other functions, visual presenter
provides with 3 functions,namely
operations are the same as step 2, step3;
6. After operation, turn off power, infrared decoding has been
finished sucessfully.
Warmly Suggest
try your best to use RS-232 controlling projector, decrease
the use of infrared remote controller, in order to make
precedure more steady.

Infrared Decoding Usage:

●
Note: Please put infrared shooting head close to receiver's
window.
Digital DVD and other equipments with RGB output 's control:
●
When DVD's
"RGB-IN", press
" RGB-IN", can press the button to control DVD （ Detailed
:To prevent from interference, please
RGB connects with visual presenter's
button repeatedly into the state of
- 22 -
detailed