Infrared Decoding And Usage; Infrared Decoding - Osoto PH-200W User Manual

☆ Infrared decoding and usage:

Infrared decoding:

●
1. Press
in the state of waiting, then press
press button into the state of infrared decoding. At this time,
users will hear a voice of "Bee", all indicators will be on.
2. Put DVD's remote controller opposite to visual presenter's
infrared receiver window, press the button, after a voice of "Bee"
shortly, at the same time indicators will be off, waiting for infrared
code.
3. Put DVD's remote controller opposite to visual presenter's
infrared receiver window, press the button, after a short voice of
"Bee", indicators will be on, which means this button has been
infrared decoded. If decode other buttons, please repeat step 3,
until it is finished.
4. After decoding, turn off visual presenter, infrared decoding
has been finished sucessfully.
5. Projector's decode: method is the same as step 3, visual
presenter can provide with 3 buttons to decode projector, can
decode projector ON, projector OFF, RGB's switch.
6. If there is mistake, please repeat step 3 and step 4, visual
presenter will cover previous operation.
For example:
The steps of decoding DVD's "MENU" are as followed:
1. Press
button for five times when visual presenter is
button for five times when visual presenter is
- 20 -
buttons for four times, and