Table of Contents
Advertisement
in the state of waiting, continually press
times, and press
At this time, users will hear a voice of "Bee", all indicators will be
on to start operation;
2. Put visual presenter's remote controller opposite to
receiver window, press
a voice of "Bee" shortly, and indicators will be off;
3. Put DVD's remote controller opposite to visual presenter's
infrared receiver window, press "MENU" button, will hear of a
voice of "Bee" shortly, indicators will be on.
4. After decoding, turn off power, infrared decoding has been
finished sucessfully.
Another example:
The steps of decoding projector's "Remote Controller" are
as followed:
1.Press
in the state of waiting, then press
and press
time, users will hear a voice of "Bee", all indicators will be on to
start operation;
2. Put visual presenter's remote controller opposite to remote
receiver window, press
of a voice of "Bee" shortly, and indicators will be off;
3. Put projector's remote controller oppoiste to visual
presenter's infrared receiver window, press "Power" button, and
button into the state of infrared decoding.
button on remote controller, hear of
button for five times when visual presenter is
button into the state of infrared decoding. At this
button on remote controller, will hear
- 21 -
buttons for four
buttons for four times,
Advertisement
Table of Contents
