Osoto PH-200W User Manual page 17

2. OSD Controller:
OSD menu operation: PICTURE, RGB, RESOLUTION and
SYSTEM. Operate as shown below:
In the normal state, press FOCUS for 3 seconds to enter into
the main menu, and then press WIDW or TELE button to enter
into PICTURE, RGB, RESOLUTION or SYSTEM setup. After
entering into the menu, press WIDW or TELE to select the option
to be set up, and then press Far or Near to set up the detailed
specification under each option.
Pressing "Tele" "Wide" to come to the image setting selection,
pressing "Focus" to come to operation, pressing "Tele" "Wide" to
select operation items needed, pressing "Far" "Near" to setup the
selected items. After entering the image setting, which could setup
the brightness, contrast, saturation and acutance.
- 16 -