Summary of Contents for Osoto PH-200W
- Page 1 DIGITAL VISUALIZER User Manual Pls read carefully before installation and keep reservation.
-
Page 2: Safety Notice
☆Safety Notice: Warning: Pls don’t let it in rain or put it into wet environment in order to prevent from fire breaking or leak of electricity. The visual presenter includes high voltage accessories and is dangerous, so the installation and repaire spareparts are prohibited, just the professional can do these. -
Page 3: Feature Instruction
☆Feature Instruction: Welcome to using visual presenter. Pls read “Manual Operation Booklet” attentively before usage. We sincerely hope this booklet will bring convinience and skilled method to you. Japan and Korea Fashionable Outer Design with smooth line, combined with fashion and creation; Special sensitive touch-key design, prevents dust and water, may use for long (patent);... - Page 4 there is no white edge, shaking, shinning and other problems, can connect with projector directly, rear projector TV, or monitor’s RGB port, specially suitable for school’s demonstration or B/W characters teaching; It includes multi-functioned intelligent central controller system, one button controls on/off, projector can be delayed to turn off, projetor and screen can be controlled combinatively, infrared decoding and others（selected）;...
-
Page 5: Table Of Contents
☆ Catalogue: Safety Notice…………………………………………………1 Feature Instruction…….….…………………………………2 Struction & components…….………………………………5 Whole struction…….…………………………………5 Back/side connections.………………………………5 Connection to Central Controller………..…………6 Connection Surrondings…….………………………………7 Whole Connections…….…..…………………………7 Connections to Central Controller…….…..….……7 Basic Operation…………….………………..………………8 Unfold process…….…..….…………………………8 Fold process………………..…………………………8 Methods of Usage……….……..……………………………9 Control Panel………….………………………………9 Remote controller……….…………..………………14 PC RS-232 controlling ……………………………15 Methods of connecting to Central controller….………16 Infrared decoding and usage….….……..………………17 Infrared Decoding……………………………………17... -
Page 6: Struction & Components
☆ Struction & components: whole structure: ● 1. Main pole; 2. Assistant lamp Arms; 3. assistant lamps; 4. drawer(once push to rebound, twice push to recover. Attention: don’t pull it out of the position with heavy strength); 5. Infrared Receiver Window; 6. CCD outshell; 7. CCD Cover; 8. Baselight; 9. -
Page 7: Connection To Central Controller
1. DC12V power input; 2. DC12V power output; 3. RS-232 controlling port, RS-232 multi-functioned cable connected to PC’s COM port (If select central controller’s spareparts, this port is used for RS-232 F/M cable); 4. S-VIDEO output port （selected） ; 5. Video Output port （ selected） ; 6. Stereo Output; 7. PC stereo Input Port;... -
Page 8: Connection Surrondings
☆Connection Surrondings: Whole Connections: ● Microphone Laptop U 盘 LCD monitor Projector Rear Amplifier Projector TV Connections to Central Controller: (selected spareparts) ● Visuliser Projector Passi. Speaker Screen Note: pls cut down Surronding equipment’s power before starting operation. - 7 -... -
Page 9: Basic Operation
☆ Basic Operation: Unfold Steps: ● 1. Lift the pole; 2. Lift assitant lamp to the left; 3. Lift assistant lamp to the right; 4. adjust CCD’s angle vertically; 5. adjust CCD’s angle horizonally; 6. adjust assitant lamps’ angle properly; 7. take CCD’s cover off (Note:Pls rotate it to the right, don’t pull with eavy strength). -
Page 10: Methods Of Usage
☆ Methods of usage: There are three methods of operation: 1. control panel 2.remote controller 3. control it through RS-232 Port supported by Computer’s Window System. Three methods can be executed individually, and can be fixed up. 1. Control Panel: （ Note: pls check exact goods for the standard.） System acquiesces the following: ●... - Page 11 Turn off: ● When turn off, press for 2 seconds, after heard of a voice of “Bee”, this indicator will change from red shinning to red, which means getting into state of waiting, and visual presenter has been turned off. If visual presenter has central controller function, when turning visual presenter off, press this button for 2 seconds, after a voice of “Bee”, power indicator shines fastly,...
- Page 12 select PC signal input, the indicator will be on red (other two indicators will be off）, when select RGB signal input, the indicator will be red（other two previewing indicators will be off）. Signal output to projector (shooting): Press this button repeatedly to select visual presenter’s signal, PC signal, and RGB signal’s output.
- Page 13 Storage: ● Pressing button can store present image. （Note: when it fulfills with images, indicator will be off, if users want to store more, please delete previous storage for 1 set and can store 1 set again） Splitted Screen: ● Pressing button can show storage of image in full screen or splited screen.
- Page 14 deleting stored images. Division: ● Pressing button can display the right part of the saved image on the splited screen; pressing button can change to another right part of the saved image. Auto Focus: ● Pressing button, the focus will adjusts itself automatically.
-
Page 15: Remote Controller
2.Remote Controller: Image Function Description POWER Turn on/ Turn off, or decode projector’s on On/Off of light and baselight, or LAMP decode projector’s off MONITOR Output Signal to Monitor PROJECTOR Output Signal to projector or TV ZOOM Enlarge image ZOOM Contract image VOLUME Increase volume... - Page 16 DVD and Projector reference (selected) Symbol Function Description MENU DVD’s menu DVD’s up DOWN DVD’s down LEFT DVD’s left RIGHT DVD’s right ENTER DVD’s enter RETURN DVD’s escape or return STOP DVD’s stop play or pause DVD’s play or pause function 1 Projector’s function 1 function 2...
- Page 17 2. OSD Controller: OSD menu operation: PICTURE, RGB, RESOLUTION and SYSTEM. Operate as shown below: In the normal state, press FOCUS for 3 seconds to enter into the main menu, and then press WIDW or TELE button to enter into PICTURE, RGB, RESOLUTION or SYSTEM setup. After entering into the menu, press WIDW or TELE to select the option to be set up, and then press Far or Near to set up the detailed specification under each option.
- Page 18 After entering the color selection item, which could select the mode of beforehand default color, or select the user-defined mode, then come to the adjust of R-OFFSET, G-OFFEST and B-OFFEST. After entering to the system setting item, which could select the language, Pal, NTSC and default setting could be choosed offering by TV mode.
- Page 19 After entering into the RESOLUTION page, you can set up the resolution. 4.PC RS-232: (It functions the same as remote controller, pls check attached disc). - 18 -...
-
Page 20: Methods Of Connecting To Central Controller
☆ Methods of connecting with Central controller: (selected) Users connect visual presenter to central controller through RS-232 F/M cable to let visual presenter control projector and screen, also provide with a 16w amplifier to connect passive speaker. 1. Projector’s power: 2.Connection of Screen Power: L-up Screen Motor... -
Page 21: Infrared Decoding And Usage
☆ Infrared decoding and usage: Infrared decoding: ● 1. Press button for five times when visual presenter is in the state of waiting, then press buttons for four times, and press button into the state of infrared decoding. At this time, users will hear a voice of “Bee”, all indicators will be on. - Page 22 in the state of waiting, continually press buttons for four times, and press button into the state of infrared decoding. At this time, users will hear a voice of “Bee”, all indicators will be on to start operation; 2. Put visual presenter’s remote controller opposite to receiver window, press button on remote controller, hear of a voice of “Bee”...
-
Page 23: Infrared Decoding Usage
will hear of a short voice “Bee” (if some projectors need 2 seconds to turn on, users need to press remote controller more than 2 seconds to decode), and indicator will be on; 4. Decode projector’s off: Put projector’s remote controller oppoiste to visual presenter’s infrared receiver window, press button, and will hear of a short voice “Bee”, indicator will be off. -
Page 24: Daily Maintainace And Attention
operation please refer to DVD’s manual）. ☆Daily Maintainance and attention: 1．Pls don’t turn on/off power frequently, in order not to shorten the using time of CCD Camera. 2．Lamps should not get on/off frequently and sunddenly, in order to lengthen their lifetime. 3．Don’t make CCD opposite to strong light, such as sunlight or sun. -
Page 25: Problem And Solution
☆Problems and Solutions: Problems Analysis and solution Check power cable, connect again Press power in to electricity Audio cable or RGB cable connected in the wrong No image way, pls connect again. no sound Input/output connect correctly or not. CCD cover has not been taken off. Distance between things and CCD is too close, so it can not focus normally, to adjust and make it more than 330mm. -
Page 26: Technique Specification
Check volume of microphone is in the lowest or not. ☆Technique Specification: F1.6(W)～F3.7(T), f=3.9～85.8mm Shooting 357×280 mm Area zoom ≥12 Optical、≥8 Digital Focus Auto/manual Aperture Auto Pick-ups 1/3″200W Pixels Color CCD TV system PAL/NTSC color system Optical Horrizontal ≥750TV lines（VGA） clarity Signal Noise ≥52dB White... - Page 27 D-SUB 15 holes socket Compound RCA socket (1V±0.2Vp-p 75Ω)（*） video audio ￠3.5 socket (-10dB 10KΩ above) （stereo） S-Video Micro DIN 4 socket（*） Output USB square socket（*） ports Projector D-SUB 9pin socket Infrared D-SUB 9pin socket control PC ON/OFF D-SUB 9pin socket Projector power (central control function) Power output...
-
Page 28: Attached List
☆ Attached list: B95E Name Unit Quantity ● Manual booklet ● Control sofeware（disc） ● Remote controller ● Adapter ● Power cable ● VGA cable ● RS-232 multi-functioned cable ● ￠3.5Audio cable ● Infrared shooting cable ● Projector RS-232 cable ● DB-9（to projector’s RS-232 port）...