Electical Connection; Drilling Pattern For Installation In The Kitchen Unit - Teka TL-62 Instruction Manual

Special U.K. Requirements
Height above gas hob: 75 mm minimum
NEVER PLACE THE COOKER HOOD OVER
AN EYE-LEVEL GRILL.
This appliance must be connectec by a
competent person, using fixed wiring via
a DOUBLE POLE SWITCHED FUSED
SPUR OUTLET.

Electical connection

We recommend that the appliance is con-
nected by a qualified electrician, who is a
member of the N.I.C.E.I.C. and who will
comply with the I.E.E. and local regulations.
Should the colour of the wires in the manis
lead for the appliance not correspond with
the coloured markings identifying the termi-
nal in your spur box proceed as follows:

Drilling pattern for installation in the kitchen unit

A Outlet for two motors
- The wire which is coloured blur must be
connected to the marked N (Neutral) or
coloured Black.
- The wire which is coloured brown must be
connected to the marked L (Live) or
couloured Red.
- Where avialable (see installation), the wire
which is coloured yellow/green must be
connected to the market
Yellow/Green.
If the cooker hood is installed for use above
a gas appliance then the provision vor ven-
tilation must be in accordance with the Gas
Safety (Installation & Use) Regulations
1984 and the relevant Building Regula-
tions. Detailed recommendations are con-
tained in the following British Standard
Codes of Practice BS6172, BS5440 and
BS6891 Current Edition.
599
132
4 x 8
458
599
B
Outlet for single motor
152
132
C
Front of extractor
or coloured
19