Tycon Power Systems TP2700WC Operation Manual page 26

Select Alarm to enter the Alarm page
4.1.2
This section is used to set the desired time alarm, high or low alarm values for the base station, as
well as enable or disable the corresponding alarm functions. Once you made your choice, choose
Save to make the setting effective. If you don't want to make any change, just press Cancel and exit
without change.
4.1.3 Max / Min Data
Select Max / Min Day to open the Max / Min Day page
This is where you can clear all the min/max readings from the base station. Press clear to clear the
data or exit to return to the main page.
26