Indoor Humidity - Tycon Power Systems TP2700WC Operation Manual

a) Light unit select (lux, fc, w/m2)
b) Temperature unit select (C, F)
c) Pressure unit select (hpa, inhg, mmhg)
d) Wind speed unit select (km/h, m/s, bft, mph, knots)
e) Rainfall unit select (mm, inch)
Save record interval time setting: 16S, 32S, 48S, 1M, 2M, ..., 239M, 240M.

S: Seconds
M: Minute

RAIN SEASON BEGIN (JAN, FEB, MAR, APR, MAY, JUN, JUL, AUG, SEP, OCT, NOV,
DEC)
Default: January. The total rain falls before that will be cleared once it comes to 0:00 of
st
January 1 . Means the new statistic annual of rain fall begins from 0:00 of January 1
can choose from January to December.

PRESSURE SETTING
a) Current weather setting.
b) Select the synoptic chart, Pre-set the value of weather and Pre-storm value.
c) Select the historical time coordinates of pressure graph.

LCD contrast setting.
Level 1-9 for option. Default: 5.The higher the level is, the brighter the display is.

KEY BEEP ON/OFF

Register new transmitter(REREGISTER ON/OFF)

Calibration setting
a) LIGHT FACTOR
LUX index calibration coefficient: default 1. (Range is 0.1-10)
b) UV FACTOR
UV factor calibration coefficient: default 1 (Range is 0.1-10)
c) IN TEMP CORRECT
Indoor temperature can be calibrated within measuring range.
d) IN HUMI CORRECT
Indoor humidity can be calibrated within measuring range.
e) OUT TEMP CORRECT
Outdoor temperature can be calibrated within measuring range.
f) OUT HUMI CORRECT
Outdoor humidity can be calibrated within measuring range.
14
st
. Users