Advertisement
To Fill the Top Fill Spirit
1. Clean the fill connectors on both the stationary and
the Spirit
®
with a clean, dry, lint-free cloth.
Caution: The fill connectors must be dry, because
moisture can cause your Spirit
to freeze together.
2. Make sure the flow control knobs
on both the Spirit and reservoir
are in the off (0) position.
3. Position the fill connector in
the upright position over the
stationary unit's connector.
4. a. If your connector is a push-on :
Lower the Spirit
unit onto the stationary until you
®
feel the connector engage.
®
:
®
and stationary unit
Step 3
Spirit
b. If your connector is Cryo2, then rotate Spirit
you feel the connectors engage. Then, carefully and
firmly, rotate the Spirit
pressing downward.
c. If the connector is a Penox, Life-Ox, or Lincare:
Rotate Spirit
until you feel the connector engage.
®
Then, carefully and firmly, rotate the Spirit
clockwise ( ) while pressing downward.
5. Now the units are locked together
Note: Continued on step 6 (page 10).
Step 4a
8
ortable
®
®
®
counterclockwise ( ) while
®
Step 4b
Step 4c
until
Advertisement
