Advertisement
Spirit
®
Note: Closing the valve at the first sign of liquid
discharge does not fill the Spirit
saves liquid oxygen.
9. For the push-on style connectors, push the release
button down until the units separate. For all other
connectors, rotate the unit until it separates from the
stationary unit.
Caution: Check liquid level gauge only after the
valve is closed.
Caution: If the Spirit
not use force. The units may be frozen together.
Wait until the units warm up—then they'll separate
easily. Do not touch any frosted parts. Should there
be any liquid leakage from the stationary unit or
Spirit
after separation, reattach the Spirit
®
immediately. Again separate the units. If the problem
persists, leave units coupled and call your health
care provider.
ortable
®
as completely, but
®
does not separate easily, do
®
Warning: Should the leakage be excessive to the
point that a stream of liquid is present, leave the
area and call your health care provider immediately.
Caution: If the Spirit
after a period of use, fill the Spirit
minutes after filling with the flow rate selection knob
set at zero for the pressure to stabilize. Then
operate as normal.
Warning: Liquid or cold gaseous oxygen can
frostbite the skin. Oxygen will result in increased
fire hazard.
Portable Release
Button (push-on
style only)
11
®
is being refilled immediately
®
and then wait 10
Advertisement
