Advertisement
Spirit
®
To Fill the Side Fill Spirit
1. Clean the fill connectors on both the stationary and
the Spirit
®
with a clean, dry, lint-free cloth.
Caution: The fill connectors must be dry, because
moisture can cause your Spirit
to freeze together.
2. Make sure the flow control knobs on both the Spirit
and reservoir are in the off (0) position.
3. Mate the Spirit
®
fill connector in the upright position
to the stationary connector.
4. Rotate the Spirit
counterclockwise ( ) until you feel
®
the pin and slot engage.
5. Carefully and firmly rotate the Spirit
upright position. Now the units are locked together.
Note: Continued on step 6
ortable
®
:
®
and stationary unit
back to the
®
Step 4
9
Step 3
Step 5
Advertisement
