Ricoh M001 Service Manual page 101

1st/2nd Message
RC Gate, Connection error
ROM Update, Waiting for Data
ROM Update:, Waiting for Data
Remove Misfeed Duplex Unit/
Open Duplex Unit cover
Remove Misfeed Internal Path/
Open Front Cover
Remove Misfeed Paper Exit
Cover/ Open Paper
Exit Cover
Remove Misfeed Paper Tray/ Pull
out Tray
Remove Paper Standard Tray
SM
Problem/Solution
Cannot communicate with remote communication
gate.
Check printer connection.
Check remote communication gate.
The printer is waiting for updated data. The image file
will be downloaded from an Internet Web site. The
image data will overwrite previous ROM , engine
firmware, PS DIMM, and other data on the machine.
No action required.
The printer is receiving updated data.
No action required.
Paper is jammed under the paper exit cover.
Remove and re-install the duplex unit.
Remove any jammed paper from the duplex unit
and under the rear cover.
Paper is jammed in the specified input paper feed
tray.
Open the front and rear cover.
Remove jammed paper.
Paper is jammed in the specified input paper tray.
Open the front and rear cover
Remove jammed paper.
Paper is jammed in the specified input paper tray.
Remove paper from the input paper tray.
Reload paper.
Open and close front cover to extinguish
message.
The standard output tray is full.
Remove paper from output tray.
4-23
Error Messages
M001