Operating Instructions - Activox XYC100B-P4L Operator's Manual

OPERATING INSTRUCTIONS

The LifeChoice Activox POC must be operated and stored in its carry case at
all times.
BEFORE FIRST USE:
1. Fully charge the device. It can take up to 4 hours to reach a full charge
on the Internal Battery. Begin charging by connecting the AC Power
Supply to the Charger Port on the device and an electrical outlet.
2. Verify that the INT Battery Bar, the External Power Symbol and the
message "Charging Internal" appear on the display. This indicates that
the system recognizes the external power source and is charging the
Internal Battery.
If an External Battery was purchased, connect it to the External Battery
Port. By design, the External Battery will begin charging after the Internal
Battery has reached a full charge. When connected, the External Battery
Bar, the External Power Symbol and the message "Charging External"
appear on the display. It can take up to 2 hours to fully charge the External
Battery.
CAUTION: Never use an external battery that is not authorized by Inova
Labs Inc.
POWERING YOUR POC
The device can be powered from four different sources: (1) Internal
Battery, (2) AC Power Supply, (3) DC Power Supply and (4) External
Battery (optional, sold separately from the Standard Package).
1. Internal Battery: A rechargeable
internal battery is located within
each device. When the device is being
powered from the Internal Battery,
the display will read "Running
Internal" and the INT Battery Bar will
appear.
If not connected to the AC or DC Power Supply, the Internal Battery
will slowly discharge over time even when not in use.
Always check the battery level prior to use to ensure adequate charge
level.
Running Internal
4
9