Hunter Type 2 series Owner's Manual And Installation Manual page 13

7 • Completing Your Installation With or Without a Bowl Light Fixture
Installing the Glass Bowl
7-4. First install B10 candelabra bulbs (60
Watt Maximum) into the sockets.
7-5. Attach the extra pull chains (included)
to the fan pull chain and light pull chain
using the plastic breakaway connector.
(You may find the plastic breakaway
connector on the end of the extra
chain.)
7-6. Thread the pull chains through the holes
in the metal disc. Then, thread the pull
chains through the hole in the center of
the glass bowl.
7-7. Thread the pull chains through the
grommet holes on the sides of the cover
plate.
7-8. Place the cover plate up against the glass
bowl. Align the holes in the cover plate
and glass bowl.
7-9. Screw the finial onto the threaded rod
end until tight.
Breakaway
Connector
Light Bulbs
(B10
Candelabra
Base 60 Watt
Maximum)
Metal Disc
Threaded
Rod
Glass Bowl
Cover Plate
Grommet Hole
Finial
12
45058-01 • 08/13/09 • Hunter Fan Company