Switching On/Off; To Switch The Tv On; To Switch The Tv Off; Input Selection - Technika 16-850 Operating Instructions Manual

Switching On/Off

To Switch the TV On

• Connect the power cord to the 110-240V AC, 50/60
Hz. Then the standby LED lights up.(The led will
blink during the standby On/Off)
• To switch on the TV from standby mode either:
• Press the " " button,
on the remote control.
• Press the " " button,
the TV. The TV will then switch on.
Note: If you switch on your TV via PROGRAMME
UP/DOWN buttons on the remote control or on the
TV set, the programme that you were watching last
will be reselected.
By either method the TV will switch on.

To Switch the TV Off

• Press the " " button on the remote control or press
the " " switch on the TV, so the TV will switch to
standby mode.
To power down the TV completely, unplug the
•
power cord from the mains socket.
Note: When the TV is switched to standby mode,
standby LED can blink to indicate that features such
as Standby Search, Over Air Download or Timer is
active.

Input Selection

Once you have connected external systems to
your TV, you can switch to different input sources.
Press "SOURCE" button on your remote control
consecutively for directly changing sources.
Note: YPbPr mode can be used only when you
connect a device that has a YPbPr output through the
PC input with YPbPr to PC cable (not supplied).
P+ / P- or a numeric button
-P/CH P/CH+
or button on

Basic Operations

You can operate your TV using both the remote
control and onset buttons.

Operation with the Buttons on the TV

Main menu OSD cannot be displayed via control
buttons. "+/-" buttons will function as volume up/down
as default. Even if you set other functions for these
buttons, "+/-" buttons will perform as default after a
short while.

Volume Setting

• Press " P/V/AV" button once and then use "+/-"
buttons to increase or decrease volume, so a volume
level scale (slider) will be displayed on the screen.
While Tv is on, +/- button can use as volume + or
volume - as default.

Programme Selection

P/V/AV" button once and then use "+/-" buttons
• Press "
to change channel. By pressing "+/-" button,you can
select the next or previous programme.

AV Mode

P/V/AV" button, source OSD will be displayed
• Hold the "
in a few second.

Operation with the Remote Control

• The remote control of your TV is designed to control
all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.
Volume Setting
• Press "V+"
button to decrease the volume. A volume level scale
(slider) will be displayed on the screen.
Programme Selection (Previous or Next
Programme)
• Press "P -"
programme.
• Press "P +"

Programme Selection (Direct Access)

• Press numeric buttons on the remote control to select
programmes between 0 and 9. The TV will switch
to the selected programme. To select programmes
between, press the numeric buttons consecutively.
When the pressing time is due for the second
numeric button, only the first digit programme will
be displayed. Press directly the programme number
to reselect single digit programmes.
English - 11 -
button to increase the volume. Press
button to select the previous
button to select the next programme.
"V-"