Introduction Features • Remote controlled colour LCD TV. Please read the corresponding instructions of this handbook prior to the first usage of the device, even • Fully integrated Terrestrial digital TV (DVB-T - when the usage of electronic devices is familiar MPEG2) to you.
Safety Precautions Lightning In case of storm and lightning or when Read the following recommended safety going on holiday, disconnect the power precautions carefully for your safety. cord from the wall outlet. Power Source Replacement Parts The TV set should be operated only from a 220-240 When replacement parts are required, make sure that V AC, 50 Hz outlet.
LCD Screen Electrical device not in the hands of children Never let children use electrical device unsupervised. The LCD panel is a very high technology product with Children can´t always recognize properly the about a million thin film transistors, giving you fine possible dangers.
Environmental Information • This television is designed to consume less energy to save environment. You not only help to save the environment but also you can save money by reducing electricity bills thanks to the energy efficiency feauture of this TV. To reduce energy consumption, you should take the following steps: •...
Remote Control Buttons Standby Current language Freeze picture Return / Exit menu / Index Page (in TXT mode) Navigation buttons OK / Channel list Picture mode selection EPG (Programme Guide) Programme Up / Down Numeric buttons Previous programme Subtitle on/off Sleep timer Teletext / Mix No function...
LCD TV and Operating Buttons FRONT and REAR VIEW Control buttons VIEW Control Buttons 1. Standby Off/On button 2. TV/AV button 3. Programme Up/Down buttons- Volume Up/Down buttons Note:You can use +/- buttons to change volume. If you want to change channels, press P/V/ AV button once and then use +/- buttons.
Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode. Note: S-VHS signal is supported via the scart socket. PC Input is for connecting a personal computer to the TV set. Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.
Power Connection Connecting the LCD TV to a PC IMPORTANT: The TV set is designed to operate on For displaying your computer’s screen image on your 220-240V AC, 50 Hz. LCD TV, you can connect your computer to the TV set. Power off both computer and display before making •...
Connecting to a DVD Player via HDMI Please refer to your DVD player’s instruction book for additional information. Power off both the TV and the device before making any connections. Note: Not all cables shown in the illustration are supplied. •...
Switching On/Off Basic Operations To Switch the TV On You can operate your TV using both the remote control and onset buttons. • Connect the power cord to the 220-240V AC, 50 Hz. Operation with the Buttons on the TV Then the standby LED lights up.(The led will blink during the standby On/Off) Main menu OSD cannot be displayed via control...
Blue button (Next day): Displays the programmes Viewing Electronic Programme of the next day. Guide (EPG) Numeric buttons (Jump): Jumps to the preferred channel directly via numeric buttons. You can view the electronic programme guide (EPG) to view information about available programmes.To OK (Options): Displays programme options including view the EPG menu please press button on the...
To select the “Yes” or “No” option, highlight the item by First Time Installation using “ ” or “ ” buttons and press OK button. IMPORTANT: Ensure that the aerial is connected Afterwards, the following OSD will be displayed on the before switching on the TV for the first time screen and the digital television will search for digital installation.
Automatic Channel Scan (Retune) Menu Analogue Manual Search Operation Digital: Searches and stores aerial DVB stations. Analogue: Searches and stores analogue stations. Full: Searches and stores both analogue and aerial DVB stations. • Whenever you select an automatic search type and press OK button, a confirmation screen will appear on the screen.
• Pressing “ ” or “ ” button moves to the previous/ next character. Pressing “ ” or “ ” button toggles the current character, i.e., ‘b’ character becomes ‘a’ by “ ” and ‘c’ by “ ”. Pressing the numeric buttons ‘0...9’...
• GREEN : Tag/untag all channels. Media Playback Using Media • BLUE : Displays filtering options. Browser Managing Stations: Sorting If the USB stick is not recognized after power off/on Channel List or First Time Installation, first, plug the USB device out and power off/on the TV set.
Rewind ( button): Goes backward. Rotate (Up/Down buttons): Rotates the image using up/down buttons. Forward ( button): Goes forward. Loop/Shuffle (BLUE button): Press once to disable Subtitle/Audio (LANG. button): Sets subtitle/Audio. Loop. Press again to disable both Loop and Shuffle. Yellow: Opens subtitle time correction menu Press once more to enable only Shuffle.
You can set your Media Browser preferences by using the Settings dialog. Press “ ” or “ ” button to highlight an item and use “ ” or “ ” button to set. View Style: Sets default browsing mode. Slide Show Interval: Sets slide show interval time. Show Subtitle: Sets subtitle enabling preference.
Cinema For normal colours, select Normal option. Setting Warm option gives white colours a slight red This zooms up the wide picture (16:9 aspect ratio) to stress. the full screen. Noise Reduction: If the broadcast signal is weak and the picture is noisy, use Noise Reduction setting to reduce the noise amount.
Phase: Depending on the resolution and scan Balance: This setting is used for emphasizing left or frequency that you input to the TV set, you may see right speaker balance. a hazy or noisy picture on the screen. In such a case Headphone: Sets headphone volume.
Using a Conditional Access Configuring Language Module Preferences IMPORTANT: Insert or remove the CI module only You can operate the TV’s language settings using when the TV is SWITCHED OFF. this menu. • In order to watch certain digital channels, a conditional Press “M”...
Language Settings Parental Settings Menu Operation • Select an item by using “ ” or “ ” button. • Use “ ” or “ ” button to set an item. • Press OK button to view more options. Menu Lock: Menu lock setting enables or disables the menu access.
Setting Programme Timers • Use “ ” or “ ” buttons to highlight Date/Time. Date,Time,Time Settings Mode and Time Zone Setting You can set programme timers for a particular will be available. programme using this feature. Use “ ” or “ ” buttons to highlight the Time Settings Press “...
You can enable or disable automatic upgrade by Configuring Other Settings setting Automatic Scanning option. To view general configuration preferences, select Other You can manually search for new software by Settings in the Settings menu and press OK button. selecting Scan for upgrade. Hard of Hearing: If the broadcaster enables any special signal concerning the audio, you can set this setting as On to receive such signals.
Teletext Tips Teletext system transmits information such as news, Screen Care: Clean the screen with a slightly damp, sports and weather on your TV. Note that is the signal soft cloth. Do not use abrasive solvents as they may degrades, for example in poor/adverse weather damage the coating layer of the TV screen.
Appendix A: PC Input Typical Appendix B: AV and HDMI Signal Display Modes Compatibility (Input Signal Types) The display has a maximum resolution of 1360 x 768. The following table is an illustration of some of the Source Supported Signals Available typical video display modes.
Appendix C: Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI converter cables (not supplied), you can refer to the following resolution information. 24Hz 25Hz 30Hz 50Hz 60Hz 480i þ 480p þ 576i þ 576p þ 720p þ...
Appendix E: Software Upgrade • Your TV is capable of finding and updating new software upgrades over broadcast channels. • For broadcast channels search, TV looks the available channels stored in your settings. So before software upgrade search, it is advised to auto search and update all available channels. 1) Software upgrade search via user interface •...
Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply. MAINS (AC) OPERATION The wires in the mains lead are coloured in accordance with the following code : GREEN FUSE &...