Winding The Bobbin - Janome Memory Craft 500E Instruction Book

z
q
x c
w
e
v
r
t
b
e
n
i
,
u
m

Winding the bobbin

z Draw the thread from the spool.
Guide the thread around the bobbin winder thread
guide.
q Bobbin winder thread guide
x Put the bobbin on the bobbin winder spindle.
w Bobbin
e Bobbin winder spindle
c Pass the thread to the bobbin.
Hold the thread with both hands and wind it around
the bobbin clockwise several times.
v Insert the thread into one of the slits t of the flange
plate r and pull the thread to cut.
r Flange plate
t Slit
b Push the bobbin winder spindle e to the right.
The visual touch screen will show the bobbin winding
sign.
If you wish to wind the bobbin thread more quickly or
slowly, you can adjust the maximum bobbin winding
speed by pressing the "+" key y or "–" key u.
NOTE:
Do not move the bobbin winder spindle while the
y
machine is running.
n Press the start/stop button i.
i Start/stop button
When the bobbin is fully wound, it will stop spinning
automatically.
Press the start/stop button i to stop the machine.
m Return the bobbin winder to its original position by
moving the spindle to the left.
, Remove the bobbin.
Insert the thread into one of the slits of the flange
plate and pull the thread to cut.
NOTE:
For safety purposes, the machine will automatically
stop 1.5 minutes after starting bobbin winding.
9