AT&T Speakerphone 927 User Manual page 18

Hide thumbs Also See for Speakerphone 927:
Table of Contents

Advertisement

TELEPHONE OPERATION
PROBLEM
Speakerphone
Does Not Work
TELEPHONE MEMORY
PROBLEM
Difficulty Storing
Numbers in Memory
(CONTINUED)
SOLUTION
• When you first install this phone, you
must lift the handset, listen for the dial tone,
then hang up at least once before using the
speakerphone. If you do not do this the
speakerphone may not work immediately.
Wait two minutes for the speakerphone
circuits to charge, then try again.
• The handset must be in the cradle for the
speakerphone to work. If you switch a call
from the handset to the speakerphone, you
must replace the handset in the cradle after
you press S.
• If you disconnect the phone for more than
15 minutes, you must lift the handset, listen
for the dial tone, then hang up once after
connecting the phone before using the
speakerphone.
SOLUTION
• Make sure the phone line is connected
properly at both ends.
• Make sure you are pressing the correct
sequence of buttons for storing numbers.
15

Advertisement

Table of Contents
loading

Table of Contents