Locating A Particular Point In A Track - Sony SCD-XE670 Operating Instructions Manual

Locating a Particular
Point in a Track
You can locate a particular point in a track
during play or play pause.
Locating a point while
monitoring the sound
(Search)
Press and hold m/M during play.
You will hear intermittent playback as the disc
goes forward or reverses.
When you reach the desired point, release the
button.
Locating a point by observing
the time indication (High-
Speed Search)
Press and hold m/M during play pause.
You will not hear the playback sound.
z When "Over!!" appears in the display
The disc has reached its end. Press . or m to go
back.
Note
Tracks that are only a few seconds long may be too
short for monitoring. In this case, the player may not
search correctly.
Locating a point using the
index function (Index Search)
Z
Press INDEX. or INDEX> repeatedly
in play or pause mode.
z What is an INDEX?
Some SACD or CD are provided with an index
marking system which divides tracks or discs into
smaller segments. This is especially useful when you
want to locate a certain point within a long track (in
classical music for example). The index search
function works only when you use a commercially
available indexed discs (usually indicated on the
label).
Locating a point by setting
the start time (Time Search)
1
Press ./> (or turn lAMSL)
to select the desired track in stop
mode.
2
Press and hold m/M to set the time
to start play while looking at the
display.
You can set the time from the beginning of
the desired a track when you press M at
first, and set the time from the end of the
desired track backward's when you press
m at first.
TRACK
5
3
Press H.
Play will start at the time search.
MULTI 5.1CH
S A C D
MIN SEC 1 2 3 4 5
6 7 8 9 10
2 . 5 7
15
US