Locating A Specific Track Or A Particular Point In A Track - Sony CDP-CE345 Operating Instructions Manual

Playing CDs
Locating a Specific Track or a
Particular Point in a Track
You can quickly locate any track while playing a disc
using the AMS (Automatic Music Sensor) control. You
can also locate a specific point in a track while playing
a disc.
(CDP-CE345 only)
>10
H
./>
m/M
GB
10
MUSIC SCAN l AMS L
H
m/M
Number buttons
You need to
To locate
Turn l AMS L clockwise until
The next or
you find the track. When using the
succeeding tracks
remote, press > repeatedly until you
find the track.
Turn l AMS L counterclockwise
The current or
until you find the track. When using
preceding tracks
the remote, press . repeatedly until
you find the track.
Press the number button of the track
A specific track
on the remote
directly (CDP-
CE345 only) Z
A track by scanning Press MUSIC SCAN before you start
playing. When you find the track you
each track for 10
want, press H to start playing.
seconds
(Music Scan)
Press M (forward) or m (backward)
A point while
and hold down until you find the
monitoring the sound
point.
Press M (forward) or m (backward)
A point quickly by
and hold down until you find the
observing the display
point. You will not hear the sound
during pause
during the operation.
z
When you directly locate a track numbered over 10
(CDP-CE345 only) Z
Press >10 first, then the corresponding number buttons
on the remote. To enter "0," use button 10/0.
Example: To play track number 30
Press >10 first, then 3 and 10/0.
z
You can extend the playing time during Music Scan
Press MUSIC SCAN repeatedly until the playing time
you want (10, 20 or 30) appears in the display. Each time
you press the button, the playing time changes cyclically.
Note
If " " appears in the display, the disc has reached the end
while you were pressing the M button. Press m or turn
l AMS L counterclockwise to go back.